UK Tumbler PollenExtractor

  Pollen Extractors are the easiest way to separate plant products. 

For pollen extraction ;-

When using a Pollen Extractor machine to separate pollens, just place your plant material into the stainless steel tumbler filter and place into the frame. Then plug in to turn the filter for an half hour or so. Make sure the filter is not turning to quickly so that the plant material gets to mix inside the filter, if you let it turn too quickly, extraction will not be optimum. This is easy due to our incorporated variator to adjust speed.  To clean the filter we recommend using a soft small brush.

For therapeutical plants ;-

Using a dry method is so much easier than ;-

- wet methods like bubble bags, which means no more making or buying bags of ice to cool your plant material for separation, then waiting for it all to dry. 

-Or dangerous extraction methods using explosive gases!

For therapeutical plants with a resin to extract, before you do the same as for pollen extraction, it is suggested to place your plant material into our stainless steel tumbler filters and then the freezer for at least an hour or more.  The stainless steel will help keep everything cool during the filtering process. The freezing solidifies the resins and helps them break-off easily from the plant matter while they tumble inside the filter. To get the ultimate results from Pollen Extractor machine, repeat the freezing process as many times as necessary to extract the maximum from your plant material.

IT IS THAT EASY

A variable speed switch incorporated to select desired rotation speed. Keep in mind it is best to keep rotation low for ultimate extraction, depending on quantity placed within the filter.

Filter sized to take approximately 80grms.

A quarter fill of the filter is best for extraction.